AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! GenComm GC7105A Base Station Analyzer – AAATesters.com

On Sale! GenComm GC7105A Base Station Analyzer – AAATesters.com

Click for Product Info and Updated Pricing

GenComm GC7105A Cable Antenna RF

GenComm GC7105A Base Station & Cable Antenna E1 T1 Interference Analyzer

Installed Options:
– Option 003: Gain/Loss Measurement
– Option 004: GPS Receiver
– Option 005: E1/T1 Analyzer
– Option 007: Cable & Antenna Analyzer
– Option 008: Interference Analyzer
– Option 020: cdmaOne/cdma2000 Analyzer
– Option 021: EVDO Analyzer
– Option 030: WCDMA Analyzer
– Option 031: HSDPA Analyzer
– Option: WIBRO Analyzer

Combines the functionality of spectrum analysis, cable and antenna analysis, power meter, and modulation analysis

Includes Hard Carrying Case & Accessories As Listed

 GenComm GC7105A Base Station Analyzer
The GC7105A is a Base Station Analyzer for installation and maintenance of modern wireless communication systems. It combines the functionality of spectrum analysis, cable and antenna analysis, power meter, and modulation analysis, including:

CDMA2000, EVDO
GSM, GPRS, EDGE
WCDMA, HSDPA

The GC7105A has been designed with a wide bandwidth analysis capability, ensuring the compatibility with future wideband technologies such as Fixed WiMAX and Mobile WiMAX.

The GC7105A is the perfect field testing solution that combines portability, due to its lightweight design and battery extended operation, and performance, with its multifunction capability and high resolution display.

In addition, the GC7105A provides an Auto-Measurement test capability which dramatically increases user’s productivity.

The GC7105 is the optimal solution for installation and maintenance of wireless communications systems.

Spectrum Analyzer
The Base Station Analyzer has a general purposed spectrum analyzer which is the most flexible test tool for RF analysis. Beyond this basic spectrum analysis functionality, a built in RF measurement application provides a single button RF power measurements including:

Channel Power
Adjacent Channel Power
Spectrum Emission Mask
Occupied Bandwidth

Interference Analyzer
The Base Station Analyzer has an interference analyzer which is the most effective way to identify periodic or intermittent interference. A spectrogram display allows the user to capture spectrum activity while displaying frequency, power and time information.
The signal tracking capability is particularly useful for observing signal strength at a single frequency over time with an audible indication.

Transmitter Analyzer
The modulation measurement suite of the Base Station Analyzer provides not only RF parametric analysis but also modulation parametric analysis for modern wireless communication systems. Built-in wireless standard test procedures allow users to test each of the following items with a single button action.

CDMA2000 / EVDO Analyzer
-CDMA Channel Power
-CDMA Adjacent Channel Power
-CDMA Spectrum Emission Mask
-CDMA Occupied Bandwidth
-CDMA Code Domain Power
-Frequency Error
-Time Offset
-Waveform Quality
-PN Search

WCDMA / HSDPA Analyzer
-WCDMA Channel Power
-Adjacent Channel Leakage Power Ratio (ACLR)
-WCDMA Spurious Emission Mask
-WCDMA Occupied Bandwidth
-WCDMA Code Domain Power
-Error Vector Magnitude (EVM)
-Peak Code Domain Error (PCDE)
-Auto Scramble Search

Cable and Antenna Analyzer
The Base Station Analyzer can perform also the function of an antenna and cable analyzer that measures cable loss, distance to fault (DTF) and voltage standing wave ratio (VSWR).

The antenna and cable analysis functionality can characterize active and passive devices such as cables, filters, amplifiers, antennas and multiplexers.

In one port measurement, users can measure feed-line cable loss, DTF location, and Antenna VSWR. And with two ports measurements users can perform gain measurements, insertion loss, and isolation; particularly useful for filters, amplifiers, Tower Mounted Amplifiers (TMA), RF path gain, and antenna isolation.

Power Meter
The Base Station Analyzer can perform two power testing methodologies:

Internal, for standard power measurements without the assistance of external power sensors.
External, for high accuracy power measurements with the assistance of external power sensors.

The internal power meter, with no additional power sensors, uses the spectrum analyzer functionality. It is a simple test methodology with reasonable accuracy. On the other hand, external power sensors perform power measurements more accurately.
The Base Station Analyzer can be equipped with a Directional Power Sensor (through-line) which has the advantage to minimize service disruption and covers an ultra-wide power range.

Power displays in either dBm or Watts
Upper/Lower limit available with Pass/Fail indication

GenComm GC7105A

E1/T1 Analyzer
The Base Station Analyzer also provides a testing solution for E1/T1 transmission lines. Various test modes are available including:

Mode: Terminated, Monitor, Bridge, Loop
Frame: PCM30, PCM31, Unframed
Code: AMI, HDB3, B8ZS
TX Pattern: 1-8, 1-16, ALL0, ALL1, 0101, 2E20
E1/T1 Pulse Mask
Alarm, Error Count and Logging

Auto-Measure
Cell sites may present irregular malfunctions which are difficult to isolate. In such cases, the Base Station Analyzer monitors the cell site for a long period of time in order to capture enough measurement data to detect the exact symptoms and isolate the problem.
The Auto-Measure functionality provides an easy setup for testing, including the programming of measurement schedules such as starting time, duration, intervals, and measurement parameters.
Based on user definable conditions, the Base Station Analyzer performs the tests and automatically stores the results.

Features:

Multi-function Integration
-The GC7105A has integrated all the necessary functions to test and measure modern wireless communication systems. Its combined functionality includes spectrum analysis, cable and antenna analysis, power meter, channel scanner, E1/T1 analysis and modulation analysis for CDMA2000, EVDO, GSM, GPRS, EDGE, WCDMA, and HSDPA.
Easy-to-use User Interface
-A common interface through its multiple functions provides the same menu structure that is easy to learn and use. It allows a quick configuration set for complicated radio systems, making a single button action to properly configure the instrument.
Auto-Measurement and Error Logging
-The Auto-Measurement function is used to test mobile systems and store the results to either internal or external memory under specified measurement conditions and schedules through user defined scenario. This functionality is particularly important for effective tracking, monitoring and isolating intermittent problems.
Compact and Lightweight Design
-The GC7105A is a compact and portable solution for users to perform outdoor maintenance jobs. The built-in high capacity Li-ion battery allows jobs at remote sites without being restricted by power cord.
Easy to Upgrade
-The GC7105A was designed to support all features upgrades, either hardware or firmware, to be implemented in the instrument’s framework, providing convenience, and reliability. This architecture has the unique benefits of configuring the Base Station Analyzer for today’s needs and an easy upgrade path for future requirements.

GC7105A

Specifications:

Standard
Frequency Accuracy ±0.05ppm Internal
Frequency Aging ±0.5ppm / year
Display 8.4”TFT LCD
800 x 600 mode
Frequency and Time Reference
Even Second TTL
10 MHz,13MHz,15MHz -10 ~ +10dBm
Spectrum Analyzer
Input Frequency Range 100kHz ~ 3GHz
Maximum Input Level +30dBm (1W)
Amplitude Accuracy ±1.0dB
Resolution Bandwidth 100Hz ~ 1MHz (1-3 sequence)
Video Bandwidth 1Hz ~ 1MHz (1-3 sequence)
Dynamic Range > 85dB
Input Attenuation 0 ~ 55dB (step 5dB)
SSB phase noise -95dBc @30KHz offset
-105dBc @100KHz offset
DANL Typical -140dBm @100Hz RBW with Preamp On
Frequency                 Typical                      Max
10MHz ~ 1GHz       -140dBm                -142dBm
1GHz ~ 2GHz          -138dBm                -140dBm
2GHz ~ 3GHz          -138dBm                -138dBm
Measurement Range DANL ~ +30dBm
Port 1 VSWR <1.5
Power Meter
Frequency Range 100KHz ~ 3GHz
Display ±100dBm (user settable)
Measurement Range -70dBm ~ +30dBm
Offset Range 0 ~ 60dB
Accuracy -40dBm = Power = +30dBm ±1.0dB
-70dBm = Power < -40dBm ±1.5dB
VSWR < 1.5
Maximum Power +30dBm(1W) without external attenuator
Cable and Antenna Analyzer
Frequency Range 25MHz ~ 3GHz
Frequency Resolution 100KHz
Data Point 126, 251, 501, 1001
VSWR
VSWR Range 1 ~65
Return Loss 0 ~ 60dB
Resolution 0.01 or 0.01dB
Cable Loss
Dynamic Range 0 ~ 30dB
Resolution 0.01dB
DTF(Distance to Fault)
Distance 1250m (4125ft)
Horizontal Range 0 to (# of data points-1) x (resolution-1)/2
Resolution (1.5×108)(VP)/(Delta)(ZF)
Vp: Cable’s relative propagation velocity
Delta[Hz] = Stop Freq – Start Freq
ZF(Zoom Factor) = Setup Dist./Max Dist
VSWR Range 1 ~ 65
Return Loss Range 0 ~ 60dB
Gain/Loss Measurement
Frequency Range 25MHz ~ 3GHz
Frequency Resolution 100KHz
Output Power Level -10dBm typical
Dynamic Range 25MHz ~ 2GHz 80dB
2GHz ~ 3GHz 60dB
CDMA TX Analyzer
Frequency Range 410MHz ~ 495MHz, 805MHz ~ 940MHz
1750MHz ~ 2170MHz
Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy
Waveform Quality (p) ±0.005 for 0.9 < p < 1
Pilot Time Alignment (Tau) ± 0.5µs
Code Domain Power ±0.5dB relative power
±1.5dB absolute power
Pilot Power ±1.0dB
Channel Power ±1.0dB
EVDO TX Analyzer
Frequency Range 410MHz ~ 495MHz, 805MHz ~ 940MHz
1750MHz ~ 2170MHz
Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy
Waveform Quality(p) ±0.005 for 0.9 < p < 1
Pilot Time Alignment (Tau) ± 0.5µs
Code Domain Power ±0.5dB relative power
±1.5dB absolute power
Pilot Power ±1.0dB
Channel Power ±1.0dB
WCDMA/HSDPA TX Analyzer
Frequency Range 869MHz ~ 894MHz,
1710MHz ~ 2170MHz
Frequency Accuracy ±10Hz + Ref Freq/Time Accuracy
EVM Accuracy ±2.0% for 2% < EVM < 20%
Residual EVM 3.0% typical
Code Domain Power ±0.5dB for code channel power > -27dB
16, 32, 64 DCPH (Test Mode 1)
16, 32 DCPH (Test Mode 2, 3)
CPICH Accuracy ±1.0dBm
Channel Power ±0.7dB (Typical)
Occupied Bandwidth ±100KHz
Residual ACLR < -56dB @5MHz, < -58dB@10MHz
ACLR Accuracy ±0.7dB
T1 Analyzer
Error Detect Code BPV, Frame, CRC
Alarm Detection Red Alarm, Yellow Alarm, AIS Alarm
Receive Level +6 ~ -36dB DSX
Electrical Interface
Connectors RX/TX RJ48C (100O)
Output 0dB, -7.5dB and -15dB
Line Code AMI, B8ZS
Impedance 100O or 1000O (Bridge)
Input
Term/Bridge/Monitor/Loop 0 ~ -20dB
Transmitter and Receiver
Framing D4, ESF, SLC96, T1 DM, Unframed
Channel Formats Full T1
Test Pattern 1-8, 1-16, ALL1, ALL0, 0101
3E-24, QRSS, 2E-23, 2E-15
2E-23 inverse, 2E-15 inverse
Additional Functions
Reference Clock Received or Internal
Event Log Capability Internal Memory or External USB
Error Insertion 1E-5, 1E-6, 1E-7
Error Rate Count CRC, Frame Code Calculated BER
Pulse Mask Checking
E1 Analyzer
Error Detect Code BPV, FAS, CRC-4
Alarm Detection FAS RAI, MFAS RAI, AIS
Receive Level +6 ~ -36dB DSX
Electrical Interface
Connectors RX/TX RJ48C (120O)
Output 0dB, -6dB (ITU-T Rec.G.703)
Line Code AMI, HDB3
Impedance Term, Monitor 120O
Bridge > 1000O
Input
Term/Bridge/Monitor 0 ~ -20dB
Transmitter and Receiver
Framing Unframed, PCM-30, PCM-30 with CRC
PCM-31, PCM-31 with CRC
Channel Formats Full E1
Test Pattern 1-8, 1-16, ALL1, ALL0, 0101, 20ITU
Additional Functions
Reference Clock Received or Internal
Event Log Capability Internal Memory or External USB
Error Insertion 1, 1E-5, 1E-6 and 1E-7
Error Rate Count CRC, Frame Code, Calculated BER
Pulse Mask Checking
External Reference Clock
10, 13, 15MHz External Reference
Input Power -10 ~ +10dBm
Connector Type SMA Female
Even Second
Input Level TTL Compatible
Connector Type SMA Female
Environmental Condition
Operation Temperature -5°C ~ 50°C (23°F ~ 122°F)
Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F)
Calibration Cycle 1 year
Dimension
Weight 5.6kg(12.1lb) (Including Battery)
Size (W x H x D) 315 x 245 x 95mm (12.4′ x 9.6′ x 3.7′)
General
Interface Ports
Serial 1 Port
USB 1.1 1 Port
10Mbps LAN 1 Port
GPS Antenna (SMA) 1 Port
Built-in Speaker
Battery (Lithium Ion)
Nominal Voltage 11.1V
Normal Capacity 7200mA
Minimum Charge Voltage 12.6V
Battery Running Time 1.5 Hours at full charge

Condition: Refurbished / Calibrated
Warranty; 90 Day Exchange

Included     

GenComm GC7105A Base Station Analyzer w/ Options (BC# 19283)
-Option 003: Gain/Loss Measurement
-Option 004: GPS Receiver
-Option 005: E1/T1 Analyzer
-Option 007: Cable & Antenna Analyzer
-Option 008: Interference Analyzer
-Option 020: cdmaOne/cdma2000 Analyzer
-Option 021: EVDO Analyzer
-Option 030: WCDMA Analyzer
-Option 031: HSDPA Analyzer
-Option: WIBRO Analyzer
(2) Armored Test Port Cables
JDSU JD7245D509 Open/Short/Load
GC7105A Base Station Analyzer Software CD
Alligator Clip Cable (Attaches to Unit)
Ethernet Cable
AC Adapter/Charger
Power Cord
RS232 PC Interface Cable
User Manual On CD-ROM
Hard Carrying Case (G)

Buy, Sell, New, Used, GenComm GC7105A


GenComm GC7105A Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List